Jack Rod Stand 3.5 Ton XL
Jack Rod Stand 3.5 Ton XL - Image 2
Jack Rod Stand 3.5 Ton XL - Image 3

Jack Rod Stand 3.5 Ton XL

The tall version of the Ken-Tool Jack Rod Stand, extending 14 to 24 inches for lifts the standard model cannot cover. 3.5 ton with the pin installed.

The Ken-Tool 21008 is the XL version of the Jack Rod Stand, built for the lifts that run past what the standard 21007 can reach. It extends from 14 inches compressed to 24 inches, so a truck or SUV raised to full jack height still gets a solid mechanical column under it rather than relying on hydraulic pressure alone.

Capacity is 3.5 tons with the pin installed and 2 tons without. Installation takes seconds, and because the rod stays with the jack there is nothing to fetch, set up or forget when a technician slides underneath.

Ken-Tool has built tire and vehicle service tools in Akron, Ohio since 1920. For lower lifts, the standard 21007 covers 8 to 14 inches; the 21009 single wheel model covers the same range at 2 tons.

Categories:

SKU: 21008

$155.53

In stock

Dimensions: 17.5 × 5.5 × 3.5 inches

Compliance and Restrictions
⚠️WARNING: Cancer and Reproductive Harm –  www.P65Warnings.ca.gov

Features & Benefits

  • Extends from 14 inches compressed to 24 inches – the tall Jack Rod option 
  • 3.5 ton maximum load with the pin installed, 2 ton without 
  • Fast and easy installation on the floor jack 
  • Supports the jack in the event of hydraulic failure 
  • Creates a safe working environment to help prevent serious injury or death 
  • Compact enough to stay mounted on the jack between uses 

 

Specifications

Specification 

Value 

Item No. 

21008 

Max load 

3.5 ton (with pin installed); 2 ton (without pin) 

Compressed length 

14″ 

Extended length 

24″ 

Width 

3.5″ 

Depth 

1.5″ 

Overall product dimensions 

17.5″ x 5.5″ x 3.5″ 

Related models 

21007 (standard, 8 in to 14 in) and 21009 (single wheel, 2 ton) 

Applications

  • Trucks, SUVs and vans raised to full jack height 
  • Fleet and municipal maintenance shops 
  • Mobile and roadside repair 
  • Any shop where technicians work over a floor jack at height 

Safety & Compliance

Always support a raised vehicle on stands rated for the load before going underneath it. Never work under a vehicle held by a jack alone. Read all instructions before use. 

Part of the Ken-Tool Jack Rod family with the 21007 standard and 21009 Single Wheel. Product sheet: 0401-287 Jack Rod 21007 / 21008 / 21009.